Raymarine 465 Especificaciones descargar pdf (Pagina 89)

Chapter 5: Operation 77

The WAYPOINT field shows the name of the waypoint. If the waypoint is

part of a route then the title field includes the waypoint index in the route.

If there is no target waypoint the text indicates NO WAYPOINT and all

waypoint data is shown as dashes, one per character. If a route is being

followed and the waypoint is not named, the text shows the waypoint

number within the route (as displayed on screen). If a GOTO Cursor or

Port is in progress, the text indicates GOTO CURSOR or GOTO ‘Port Name’.

BRG, RNG and XTE data relate to the target waypoint.

Time refers to time data which is acquired from GPS information. Any

local time offset is set in the System Set Up menu, see Chapter 4.

The Time To Go (TTG) and Estimated Time of Arrival (ETA) data relate

to the target waypoint (not the whole route) and are based on the Speed

Over Ground (SOG) towards the target. If the VMG is negative, or data is

not available, these fields are replaced by dashes, one per character.

The steering instruction is STEER STARBOARD if the XTE is 0.01nm or

more to port, STEER PORT if the XTE is 0.01nm or more to starboard or ON

COURSE if XTE is less than 0.01 on either side.

If no GoTo or Follow is in progress, the steering instruction is NOT

TRACKING, no steering arrows are shown, but the rhumb line indicator is

shown.

The graphical XTE indication places arrows either side of the rhumb line

indicator and pointing towards it, dependent on the value of XTE. The

first arrow is shown when the XTE reaches 0.01nm, the second at.05nm

and subsequently at 0.1nm intervals.

Note: The steering instruction and graphical XTE indication are repeat-

ed on all text-only displays.

81236_1.book Page 77 Monday, January 5, 2004 3:41 PM

1 2 ... 84 85 86 87 88 89 90 91 92 93 94 ... 131 132

Sin comentarios

Raymarine 465 Especificaciones Pagina 89