Raymarine 465 Especificaciones descargar pdf (Pagina 29)

Chapter 2: Installation 19

➤ Connect to the power supply using the power cable supplied:

1. Connect the molded connector to the POWER/NMEA connector on

the rear chartplotter. Run the free end back to the vessel’s distribution

panel or to a junction box.

2. Cut the cable to length and connect the red wire (via a 1A quick blow

fuse) to the + battery terminal and the black wire to the – terminal.

3. Use a suitable junction box to connect to any NMEA equipment.

4. Cut any unused wires short or insulate and tape back.

Note: If the power connections are accidentally reversed, the system will

not function. Use a voltmeter to check that the input power leads are con-

nected with the correct polarity.

Function Color

Battery negative – Black

Battery positive + (10.0VDC to

18.0VDC)

Red

NMEA Input (-ve) common Green

Not connected Gray

NMEA output (+ve) Yellow

NMEA output (-ve) common Brown

Not connected Drain/Screen (bare wire)

NMEA Input (+ve) White

81236_1.book Page 19 Monday, January 5, 2004 3:41 PM

1 2 ... 24 25 26 27 28 29 30 31 32 33 34 ... 131 132

Sin comentarios

Raymarine 465 Especificaciones Pagina 29