Raymarine 465 Especificaciones descargar pdf (Pagina 82)

70 RC435 and RC435i Chartplotters

2. Select RESTART XTE. The dotted line between the original origin and

the target waypoint is redrawn from the vessel’s current position to

the target waypoint and the XTE is reset to zero

Going to an Individual Target

Rather than following a route, you can go directly to a selected target.

This can be an existing waypoint, a port or nearest facility or the current

cursor position.

Go to a Waypoint

To navigate directly to an existing waypoint:

1. From the normal chart display either:

i. Use the trackpad to position the cursor over the required waypoint

until the waypoint options function is displayed:

...then press ENTER to display the waypoint functions:

ii. Press the GOTO key to display the waypoint options and select

GOTO WAYPOINT; the waypoint list appears. Use the cursor to

select the required waypoint:

D4689_1

STOP

GOTO

RESTART

XTE

81236_1.book Page 70 Monday, January 5, 2004 3:41 PM

1 2 ... 77 78 79 80 81 82 83 84 85 86 87 ... 131 132

Sin comentarios

Raymarine 465 Especificaciones Pagina 82