Raymarine 465 Especificaciones descargar pdf (Pagina 56)

42 RC435 and RC435i Chartplotters

2. Using the trackpad, set the value of offset required. The distance and

bearing of cursor from vessel is displayed in the Status Bar as BRG and

RNG.

3. Press ENTER to confirm the selected offset value or CLEAR to reset

the value to zero and return to the Chart Set Up menu.

An offset of 2nm or less is applied to all position data equal to the range

and bearing between the WGS 84 position and the position entered. The

menu returns with ON highlighted.

Note: Pressing ENTER with a selected offset of more than 2nm gives a

warning message which is cleared on any key press. The Calibration Set

Up mode maintains and the user can either reselect an acceptable offset

or press CLEAR to reset the value to zero and return to the Set Up menu.

4.4 GPS Setup

The GPS set up page provides information for the status of the tracked

navigation satellites plus HDOP and satellite Fix Status. It also provides

the ability to select the SD satellite and to reset the GPS system.

➤ To select GPS Set Up:

1. Press the PAGE key to display the SET UP functions:

2. Use the trackpad to highlight the GPS SET UP function and press

ENTER to display the GPS STATUS screen and soft key. GPS STATUS is

displayed.

D4694_1

81236_1.book Page 42 Monday, January 5, 2004 3:41 PM

1 2 ... 51 52 53 54 55 56 57 58 59 60 61 ... 131 132

Sin comentarios

Raymarine 465 Especificaciones Pagina 56