
Chapter 3: Getting Started 25
2. Press the trackpad left/right to select the LIGHTS function.
3. Press the trackpad top/bottom to increase or decrease the lighting to
one of four levels. You can press and hold the trackpad to change the
setting more rapidly. The lighting level is adjusted as you change the
setting.
4. Press the trackpad right to select the CONTRAST control. There are 16
contrast levels. Adjust the setting as for lighting to select the best
viewing level.
5. Press CLEAR to return to the chart screen, with the new lighting and
contrast levels retained.
3.3 Simulator Mode
When simulator mode is started, your initial simulated position is
wherever the cursor was last positioned. To practice using the
chartplotter in a particular chart area, use the trackpad to pan to that area,
then switch simulator ON. When in Simulator mode, a flashing SIM
indication is displayed in the top left hand corner of the chart screen.
Note: If real position data is available and the simulator is active, simu-
lated data takes precedence. On power-up the simulator defaults to its
previous setting on power-down.
CAUTION: Simulator Mode
Care should be taken to determine the desired mode on power-up.
Simulated data should never be used for navigational purposes.
➤ To view a chart image using simulated data:
1. Press the PAGE key to display the SET UP function bar:
2. Press trackpad left/right to highlight SYSTEM SET UP and press ENTER
to display the System Set Up menu.
3. Use trackpad up/down to highlight the SIMULATOR option.
4. Use trackpad left/right to select ON.
5. If necessary, use trackpad up/down to highlight, in turn, the SIMU-
LATED SOG and COG options and trackpad left/right to set as desired.
Speed is set in 1Kt intervals and Course in 1° intervals.
6. Press CLEAR twice to return to the chart screen.
7. A flashing SIM indicator appears at the top left of the chart screen.
D4694_1
81236_1.book Page 25 Monday, January 5, 2004 3:41 PM
Comentarios a estos manuales