Raymarine 465 Especificaciones descargar pdf (Pagina 80)

68 RC435 and RC435i Chartplotters

Target Point Arrival

Target alarms (see Chapter 5) can be set up to sound when the vessel is

approaching the target point. The arrival alarm is defined as a circle (not

visible on the screen), with a specified radius around the target.

The alarm is triggered when either of the following conditions is met:

• The distance to the target point is less than that specified for the

Arrival alarm.

• The vessel reaches the closest point of approach to the target (it

crosses a line passing through the waypoint and perpendicular to the

track).

➤ Once the alarm is triggered, the vessel goes towards the next waypoint in

the route. Press any key to cancel the arrival alarm.

The target becomes the origin, the next waypoint becomes the target

point and the two are connected by a dotted line indicating the current leg.

If the target waypoint was the subject of a GoTo, or was the last waypoint

in a route, the pop-up alarm is cleared.

Alter a Route

A route can be followed from a selected waypoint (Join a route) or, if

already following, advanced to the next waypoint. Also the XTE can be

restarted, setting the current vessel position as the new origin.

In addition, a selected waypoint can be moved as described in

Section 5.2, or removed from the route as described in Section 5.3.

Join a Route

➤ To start following the current route from a selected waypoint:

1. Move the cursor over a route waypoint until the WAYPOINT OPTIONS

function is displayed.

2. Press ENTER and select FOLLOW FROM HERE.

81236_1.book Page 68 Monday, January 5, 2004 3:41 PM

1 2 ... 75 76 77 78 79 80 81 82 83 84 85 ... 131 132

Sin comentarios

Raymarine 465 Especificaciones Pagina 80