search

Raymarine SmartPilot SPX-30 Manual de instalación Pagina 23

  • Descarga
  • Añadir a mis manuales
  • Imprimir
  • Pagina
    / 48
  • Tabla de contenidos
  • SOLUCIÓN DE PROBLEMAS
    •
  • MARCADORES
    • Valorado. / 5. Basado en revisión del cliente
Vista de pagina 22
Chapter 2: Commissioning procedures 15
Autolearn
The next stage of calibration requires the autopilot to learn the vessel’s steering
characteristics. This will require the pilot to execute a number of maneuvers.
CAUTION: You must have significant clear water in front of the boat to
accommodate a series of maneuvers, which include sudden, sharp turns.
There should be a clear area at least 100m wide and 500m ahead.
1. Ensure there is sufficient free water in front of
the vessel.
2. Press
ENTER
to continue.
1. Press
AUTO
to continue.
2. Maintain a normal cruising speed (at least 3
knots).
3. During this procedure a number of messages
will appear. Simply follow the prompts to
complete the procedure. Ensure that ‘PASS’ is
displayed signalling the completion of
autolearn.
4. Press
ENTER
to finish calibration and return to
manual helm.
5. Pilot enters
STANDBY
You have successfully completed the
commissioning process for your SmartPilot X
system.
2.4 After commissioning
Before using the autopilot system you should familiarize yourself with its functions
and ensure you know how to use it correctly. It is important to:
• Read the user documentation supplied with your ST70 pilot controller
• Trial the system in familiar waters away from other vessels and obstructions
CAUTION: Any additional changes you make to your system settings may
require you to repeat the calibration process. Refer to the ST70 Pilot
Controller User Reference Guide for more information.
EMC Conformance
Always check the installation before going to sea to make sure that it is not affected by
radio transmissions, engine starting etc.
Press ENTER to continue.
Autolearn
D10876-1
The next stage of calibration
requires the Autopilot to
learn the vessel's steering
characteristics. This will
require the pilot to execute
a number of manouevres.
Please ensure there is a free
area of water 100m wide by
500m in front of the vessel.
Press AUTO to continue.
Autolearn
i
D10878-1
The vessel will zigzag and make SUDDEN SHARP
TURNS.
STANDB Y
Press ENTER to continue.
Autolearn
i
D10877-1
YOU HAVE THE HELM.
PASS
81287_1.book Page 15 Tuesday, March 18, 2008 11:50 AM
Vista de pagina 22
1 2 ... 18 19 20 21 22 23 24 25 26 27 28 ... 47 48

Comentarios a estos manuales

Sin comentarios
  • Blue Max Wildcat Territory Vertex Diagnostics RMI Cleveland
  • MikroTik Módulos de conmutación de red Robic No Casio Juguetes y accesorios Harman Kardon Reproductores Blu-Ray Ducati Motocicletas
  • Dension ice-Link:Plus Sony CCD-TR748E Samsung SL-M4020NX MyMix IEX-16L Eneo BCR-3004
  • Canon EF 70-300mm f/4-5.6L IS USM Manual de usuario Kyoritsu 3122 Manual de usuario LG SJ2 Manual de usuario Whirlpool ACMT 6533/IX/2 Instrucciones de uso